Assembly instructions for V- and U-shaped fitting room

Lay out all the parts so you have a clear overview before assembly.

Included:
1 pc. Curtain rod (L- or U-shaped)
2 pcs. Wall brackets
1 pc. Wire with wire clips
2 pcs. Curtain panels (H: 190 cm)
20 pcs. Hooks

Installing the curtain rod

Attach the first wall bracket to the wall at an appropriate height and spacing.
The height is adjusted according to the curtain panel length.
The spacing is determined by the desired placement within the room.

Mount the curtain rod onto the wall bracket.
Secure the final wall bracket to the curtain rod, then mount it to the wall.

Mounting the wire suspension
For an L-shaped sample room, mount the wire suspension at the corner of the curtain rod.

For a U-shaped sample room, mount the wire suspension in the middle of the section of the curtain rod that runs parallel to the wall. The wire suspension is mounted in a glider at the top of the curtain rod.

Note: U-shaped sample rooms include two panels of different widths.
Make sure to install them so you achieve the best visual and practical result.