7,000 products - Store inventory and sales promoters

Assembly instructions for 3-sided fitting room - item no. 2009

How to assemble your freestanding 3-sided fitting room
Step by step – without fixing to the wall.

Item no.: 2009

Before you start
Lay out all parts so you have a clear overview of what is included.

4 posts
6 connector tubes
1 curtain rod
1 curtain
12 curtain rings
3 melamine panels
4 leveling feet ( a )
4 end caps ( b )
14 Allen bolts for posts ( c )
12 screws for melamine panels ( d )
3 threaded inserts
( Used only if multiple fitting rooms are mounted in a row )
1 Allen key ( e )

Parts for fitting room

Not included:
Screws for wall mounting – these depend on the wall type and the chosen mounting method.

Assembling the fitting room wall – freestanding 3-sided fitting room (without wall attachment)

1.   Install the leveling feet at the base of the 4 square tubes/posts.
      Now we have the orientation of the posts – top and bottom.
2.   Fit the two connector tubes onto post no. 1.
      The small holes should face the panel.
3.   Fit post no. 2 onto the 2 connector tubes.
      First wall section is complete.

  • Repeat:
    4.   Fit the two connector tubes onto post no. 2.
    5.   Fit post no. 3 onto the 2 connector tubes.
    The second wall section is complete.
  • Repeat:
    6.   Fit the two connector tubes onto post no. 3.
    7.   Fit post no. 4 onto the 2 connector tubes.
    The third wall section is complete.

8.   Attach the curtain rod to posts no. 1 and 4.
      Remember to put the curtain rings on before final assembly.

9.   Install the melamine panels into the frames.
      Screw with 2x2 screws via the connector tubes – from the top and the bottom.

10. Hang the curtain on the curtain rings.
      Use the gathering tape to create more pleats if desired.
      Optionally steam the curtain with a steamer.

11. Install the end caps at the top of the 4 square tubes/posts.

Hang the curtain on the curtain rings.
     – Use the gathering tape to give the curtain neat folds.
     – For a smooth result, the curtain can be steamed with a steamer.

Attach the curtain rod to the outer post – pointing toward the wall that forms the other side of the fitting room.

Assembly drawing for 3-sided fitting room (2009)