Assembly instructions for 1-sided fitting room - item no. 2007

How to assemble your 1-sided fitting room
Step by step – from uprights and middle tubes to curtain rod and curtain.

Item no.: 2007

Before you start
Lay out all parts so you can clearly see what is included.
2 pcs. Uprights
2 pcs. Middle tubes
1 pc. Curtain rod
1 pc. Wall flange
1 pc. Curtain
12 pcs. Curtain rings
1 pc. Melamine board
2 pcs. Adjustable feet (a)
2 pcs. End caps (b)
5 pcs. Allen bolts for uprights (c)
4 pcs. Screws for melamine board (d)
1 pc. Allen key (e)

Not included:
Screws for wall mounting – these depend on the wall type and the chosen mounting method.

Assembling the fitting room wall (single wall only)

• Fit the end caps (b) to the top of the two square tubes/uprights.
• Fit the adjustable feet (a) to the bottom of the uprights.
• Attach the two middle tubes to one upright.
• Mount the upright with the middle tubes to the wall at a suitable distance from the back wall
  (the other wall of the fitting room).
• Attach the other upright to the middle tubes so you get a stable frame.

Install the curtain rod into the outer upright – pointing toward the wall that forms the other side of the fitting room.

• Fasten the wall flange to the wall at the same height so the curtain rod is level.
  (Remember to put the curtain rings on before fully installing the curtain rod!)
• Install the melamine board into the frame – secure it with 2x2 screws (d) through the middle tubes.
• Hang the curtain on the curtain rings.

Tip: Use the gathering tape if you want extra folds in the curtain.
Steam the curtain with a steamer for a neat drape.

Assembling 1 fitting room wall with 2 curtain rods (one wall and two rods)

• Install two curtain rods in the middle upright using the threaded rod.

For this setup you will need to purchase a threaded adapter, an extra curtain rod, a wall flange, a curtain and hooks.