Assembly instructions for 2-sided fitting room - item no. 2008

Item no.: 2008

Before you begin
Lay out all parts so you have a clear overview of what is included.
3 Uprights
4 Cross tubes
1 Curtain rod
1 Wall flange
1 Curtain
12 Curtain rings
2 Melamine panels
3 Leveling feet (a)
3 End caps (b)
10 Allen bolts for uprights (c)
8 Screws for melamine panels (d)
1 Allen key (e)

Not included:
Screws for wall mounting – these depend on the wall type and the chosen mounting method.

Assembly of the fitting room wall including attachment to wall

🔸Fit the end caps (b) to the top of the three square tubes/uprights.
🔸Fit the leveling feet (a) to the bottom of the uprights.
– The uprights now have a defined top and bottom.
🔸Fit the two cross tubes to upright no. 1.
– The small holes should face the panel.
🔸Mount the frame to the wall at a suitable distance from the fixed wall.
– This frame forms one side of the fitting room wall.

🔸Install upright no. 2 onto the two cross tubes.
– The first wall frame is now complete.
🔸Repeat the process: Fit two new cross tubes to upright no. 2.

🔸Fit upright no. 3 onto these cross tubes.
– The second wall frame is now complete.

🔸Install the curtain rod into upright no. 3 so the rod points toward the fixed wall.
🔸Mount the wall flange to the fixed wall at an appropriate height so the curtain rod is level.
– Secure the curtain rod in the wall flange.
– Remember to put the curtain rings on before finalizing the installation.

🔸Fit the melamine panels into the frames.
– Screw the panels in place with 2 x 2 screws via the cross tubes (top and bottom).

🔸Hang the curtain on the curtain rings.
– Optionally use the gathering tape to create neat pleats.
– For a smooth result, the curtain can be steamed with a steamer.

Install the curtain rod in the outermost upright so it points toward the wall that forms the other side of the fitting room.